Меню

Add hardware windows 10

Reactivating Windows 10 after a hardware change

Activation helps verify that your copy of Windows is genuine and hasn’t been used on more devices than the Microsoft Software License Terms allow.

When installing Windows 10, the digital license associates itself with your device’s hardware. If you make significant hardware changes on your device, such as replacing your motherboard, Windows will no longer find a license that matches your device, and you’ll need to reactivate Windows to get it up and running.

To activate Windows, you’ll need either a digital license or a product key. To find out which you need, see «What activation method do I use, product key or digital license?» in Activate Windows 10. Then, use the following info to help you successfully prepare for a hardware change and reactivate Windows 10.

Prepare your Windows 10 device for a hardware change

First, follow these steps to find out if Windows 10 is already activated.

Select the Start button, then select Settings > Update & Security > Activation .

If you’re not activated, complete the activation process with the steps you see on the Activation page. If you experience an error while activating, see Get help with Windows activation errors.

Once you’ve confirmed that Windows 10 is activated, follow these steps:

In Windows 10 (version 1607 or later), it is essential that you link your Microsoft account with the Windows 10 digital license on your device. Linking your Microsoft account with your digital license allows you to reactivate Windows using the Activation troubleshooter whenever you make a significant hardware change.

First, you’ll need to find out if your Microsoft account (What is a Microsoft account?) is linked to your Windows 10 digital license. To find out, select the Start button, then select Settings > Update & Security and then select Activation . The activation status message will tell you if your account is linked.

Windows is activated with a digital license

This means that your Microsoft account is not linked to your digital license.

Follow instructions for Add an account.

Windows is activated with a digital license linked to your Microsoft account

This means that your Microsoft account is already linked to your digital license.

No further action is required. You are ready to use the activation troubleshooter.

If your Microsoft account is not linked to your digital license, follow these steps to Add an account:

Sign in as an administrator to add your Microsoft account. To confirm that you’re using an administrator account, select the Start button, then select Settings > Accounts > Your info . Under your name, you’ll see Administrator. If you’re not an administrator, see Create a local user or administrator account.
Go to Your info in Settings

Confirm that the administrator account is also your Microsoft account by checking to see if an email address is displayed above Administrator. If an email address is displayed, this is a Microsoft account. If not, you’re logged in using a local account. If you don’t yet have a Microsoft account, see How to create a new Microsoft account.

Once you confirm that you’re an administrator and using your Microsoft account, go back to the Activation page, select Add an account, enter your Microsoft account and password, then select Sign in.

After your Microsoft account has been added, the message on the Activation page will change to: Windows is activated with a digital license linked to your Microsoft account.

Make sure that the edition, Windows 10 Home or Windows 10 Pro, is the same before and after your hardware change. Your digital license and product key will reactivate only if the edition remains the same.

You can see your edition on the same Activation page where you checked your activation status. To see which edition you have, select the Start button, then select Settings > Update & Security > Activation .

If you used a product key to get to Windows 10, then you’ll need that key again after the hardware change. To find out how to locate your key, see Find your Windows product key.

For more info about product keys and digital licenses, see Activate Windows 10.

Reactivate Windows 10 after a hardware change

When you’re ready to reactivate, make sure that your device is connected to the internet and then follow the steps for either a digital license or product key.

You’ll need to first add your Microsoft account and link your account to the digital license on your device. After linking your Microsoft account, run the Activation troubleshooter to reactivate Windows 10.

This troubleshooter will only be available if your copy of Windows 10 (version 1607 or later) isn’t activated.

To use the Activation troubleshooter:

Select the Start button, then select Settings > Update & Security > Activation > Troubleshoot . The troubleshooter will show Windows can’t be activated on your device.

Select I changed hardware on this device recently, then select Next.

Enter your connected Microsoft account and password, then select Sign in. The troubleshooter will only work with the connected Microsoft account.

From the list of devices that are linked to your Microsoft account, select the check box next to This is the device I’m using right now.

If you don’t see the device you’re using in the list of results, make sure that you signed in using the same Microsoft account you associated with the Windows 10 digital license on your device.

If you continue to experience errors while activating, see Get help with Windows activation errors and locate the error you’re getting.

If you didn’t link your Microsoft account to the digital license before the hardware change AND you used a product key to upgrade to Windows 10, then continue to next section.

If Windows 10 wasn’t pre-installed on your device when purchased and you used a product key to upgrade to Windows 10, then you’ll need that same product key after the hardware change.

Select the Start button, then select Settings > Update & Security > Activation > Change Product Key, then enter the product key.

If you installed a retail copy of Windows 10 on your device using a Windows 10 product key and then made hardware changes, follow this same process using your Windows 10 product key.

If you continue to experience errors while activating, see Get help with Windows activation errors and locate the error you’re getting.

If you don’t have a digital license or product key

If you don’t have a product key or digital license, you can purchase a Windows 10 digital license after installation finishes. Follow these steps to make a purchase:

Select the Start button, then select Settings > Update & Security > Activation . Then select Go to Store to go to the Microsoft Store app where you can purchase a Windows 10 digital license.

Need more help?

If you need additional help reactivating Windows on your device, contact customer support.

Источник статьи: http://support.microsoft.com/en-us/windows/reactivating-windows-10-after-a-hardware-change-2c0e962a-f04c-145b-6ead-fb3fc72b6665

How to Add a Legacy Hardware on Windows 10

It’s nothing new but you might be looking for a way out to Add a Legacy Hardware on Windows 10. Microsoft loads the drivers for most of the legacy devices before handing over the users but some of them need to be installed manually. The users can rather easily perform this task from Device Manager.

What is Legacy Hardware?

Legacy is a word earmarked for the hardware once manufactured. This one is comparatively less functional as well as older than the new one. Usually, we consider an older version as a legacy program. For example, while setting up the current version of an MS Office on a new computer where you were using Office 2000, the earlier will be legacy software. In the same way, if you have upgraded your modem to V.92, V.90 is legacy hardware in this case.

Microsoft puts the preloaded drivers which are equally effective for the legacy hardware such as a keyboard, mouse, printers as well as Infrared ports. These lack plug and play option and system use them for legacy devices only. But some of them have executable drivers too. In that case, you need to install those drivers manually using Device Manager.

How to Add a Legacy Hardware on Windows 10

Device manager is the tool that lets you Add a Legacy Hardware in Windows 10 with multiple methods. Follow one after another –

Step-1: Perform a click on the Cortana search bar, type devmgmt, and then Press Enter.

Step-2: Select the Device name to which you want to add Legacy Hardware. Go to the menu bar, make a click on “Action” tab. Choose “Add Legacy hardware” option from the dropdown menu.

Step-3: Select “Next” from Add hardware wizard in order to move forward.

Automatic Update to Legacy Hardware

Step-4: From popup, select “Search for and install the hardware automatically (Recommended)” to let the windows searching for the driver over the internet and install by itself and hit the “Next” button.

If it is available on the manufacturer website the system will take a few minutes and add the Legacy Hardware.

Manual Installation

All the divers are kept in the system files at different locations. This method will manually install the available legacy hardware from your system.

Step-5: Click on the round cell against the second option “Install the hardware that I manually select from a list (Advanced)” and hit “Next”.

Hit a click on “Show All devices” option and select “Next”.

The subsequent window will retrieve a list of all the devices. Choose “Manufacturer” from the left box and “Model” of your hardware from the right and click on Next.

To Start installing the hardware hit the Next button.

Add a Legacy Hardware on Windows 10 using disk

If you have the legacy hardware on disk or USB or flash drive then the device manager also provides a tool to add.

  • Pick a device from the list on the device manager console and press Action followed by Add Legacy Hardware on the top menu bar.
  • Click on Next on the coming window and afterward select the round cell before the later choice Install the hardware that I manually select from a list (Advanced).
  • Under Common hardware type, choose Show All Devices and press Next.
  • Insert the disk having the legacy driver software into DVD Drive and select the Device from Manufacturer box.
  • Do a click on Have Disk. choose the appropriate drive, and select OK.

  • Finally, click on OK moreover Next twice on the subsequent window respectively to start the installation.

When you have stored the driver file on your PC

Sometimes you might copy the driver file on your system from the disk or download from the web. In this condition, click on Have Disk and then on Browse.

  • Choose the driver having .inf extension and hit the “Open “option.
  • The will show the drivers listed in the package. Select the one you want to proceed with and click “Next” to continue.
  • Choose “Install” option from Windows security once prompts for permission.
  • In next few seconds, When the Installation finishes successfully, select “Finish”. Checklist of drivers in the Device Manager to see the new one is added.

That’s all about the ways to Add a Legacy Hardware on Windows 10

Источник статьи: http://www.howto-connect.com/how-to-add-a-legacy-hardware-on-windows-10/


Adblock
detector